1935 Featherweight Singer.
#12
Super Member
Join Date: Feb 2011
Location: Rhode Island
Posts: 1,663
Nice machine. As far as the case - good luck! I've had my FW and its stinky case for almost two years now. I have tried every remedy available online to get the stink out... have asked for advice on this board... and nothing has worked. I now have the case double-bagged (inside two heavy-duty trash bags) in my basement, and as soon as I walk down there, the stench assaults me. It's that disgusting! The machine itself also smelled, but it was primarily just from being in that case. I cleaned up the machine and it's fine now.
The only thing left for me to try is to strip down the case to the wooden base and refinish it, but I just haven't had the time to do that. So I'm saving up for a new reproduction case. I know, the purists will bash me for saying that!! But a girl's gotta do what she's gotta do!
The only thing left for me to try is to strip down the case to the wooden base and refinish it, but I just haven't had the time to do that. So I'm saving up for a new reproduction case. I know, the purists will bash me for saying that!! But a girl's gotta do what she's gotta do!
#14
Those old boxes always stink, from the glue they used. Sewnoma suggested leaving some odoreater shoe inserts in the box and I can tell you that does work. I just keep a pair in my cases with the machines. There's charcoal in them and it absorbs and neutralizes the odors.
#15
Super Member
Join Date: Sep 2015
Posts: 1,963
It's a great find. If I ever get the chance on a Featherweight I hope it's and early one. I like the art deco decore on the chrome plate before they turned to the striped or painted side plate; a bit silly really but that's how it is. My hope is a 201 with potted motor and similar decor on the plates
A trick with the smelly box is to leave the lid open in a dry heated room, or even outside on a nice day. Charcoal bags or silica bags helps. For some reason they seem to air out after a while with a bit of effort, but I read lots of complaints on Featherweights being stored a way with the lid closed. I had a very smelly buttonholer box, it took about a year before it aired out; I had it on a book shelf, box open with the lid next to the bottom half.
A trick with the smelly box is to leave the lid open in a dry heated room, or even outside on a nice day. Charcoal bags or silica bags helps. For some reason they seem to air out after a while with a bit of effort, but I read lots of complaints on Featherweights being stored a way with the lid closed. I had a very smelly buttonholer box, it took about a year before it aired out; I had it on a book shelf, box open with the lid next to the bottom half.
Last edited by Mickey2; 01-26-2016 at 12:14 PM.
#17
Super Member
Join Date: Aug 2011
Location: New York
Posts: 1,572
There are many remedies online for the stink of machine and its case. Some of the smell is from the old animal hide/hoof glues getting moldy, and in extreme cases where nothing else has worked using a clear craft spray to seal the case inside may be the only remedy short of peeling off the covering and bleaching the wood. A stinky machine can be easily cleaned and the felt in the drip pan replaced. Just don't put it back into the stinky case til you are sure it is fresh as a daisy.
#18
Super Member
Join Date: Jul 2013
Location: Tri-Cities, WA
Posts: 1,063
I've had good luck stuffing crinkled up newspaper into the stinky cases and letting them sit for a while. If the outside also smells, you could stuff it, then set it in a bag full of newspaper for a week or two. Change out the paper occasionally. I do this when my big outside garbage can gets smelly, and it helps there, too.
For what it's worth, I keep my FW in a small roller bag. Never use the case at all!
For what it's worth, I keep my FW in a small roller bag. Never use the case at all!
#20
Member
Join Date: Sep 2010
Location: Beautiful Middle Tennessee
Posts: 98
"Stinky" Featherweight cases
There are many remedies online for the stink of machine and its case. Some of the smell is from the old animal hide/hoof glues getting moldy, and in extreme cases where nothing else has worked using a clear craft spray to seal the case inside may be the only remedy short of peeling off the covering and bleaching the wood. A stinky machine can be easily cleaned and the felt in the drip pan replaced. Just don't put it back into the stinky case til you are sure it is fresh as a daisy.
Thread
Thread Starter
Forum
Replies
Last Post
Debbie32900
For Vintage & Antique Machine Enthusiasts
4
05-02-2013 03:10 AM
Debbie32900
For Vintage & Antique Machine Enthusiasts
5
04-12-2013 04:31 PM