Decal reglue / repair
#1
Super Member
Thread Starter
Join Date: Feb 2012
Posts: 8,091
Decal reglue / repair
I was sewing a Whacky Bag on my HOTHER today and noticed that there is a crack towards the right side of the decal in the center of the bed. To the left of the crack is a bubble. I touched it and you can see it move.
[ATTACH=CONFIG]470786[/ATTACH]
The bubble is under the petuum with the crack running through the m. Try as I might I couldn't get the camera to see what my eyes did.
I have no idea how long that bubble has been there, but I want to fix it. Somehow get something gluie under the decal then gently massage it down. Last thing I want is something snagging that bubble and destroying the decal.
I have some ideas, but thought I'd ask here. Some of our members can be downright creative with little things like this.
TIA
Joe
[ATTACH=CONFIG]470786[/ATTACH]
The bubble is under the petuum with the crack running through the m. Try as I might I couldn't get the camera to see what my eyes did.
I have no idea how long that bubble has been there, but I want to fix it. Somehow get something gluie under the decal then gently massage it down. Last thing I want is something snagging that bubble and destroying the decal.
I have some ideas, but thought I'd ask here. Some of our members can be downright creative with little things like this.
TIA
Joe
#3
This sounds silly, and I am the farthest thing from an expert here and not very creative either, but could you get a tiny syringe and inject some "gluie" stuff under the bubble then smooth it out?
And what is a Whacky Bag?
Jp
And what is a Whacky Bag?
Jp
Last edited by minibarn; 04-09-2014 at 05:59 AM. Reason: typo
#4
Super Member
Thread Starter
Join Date: Feb 2012
Posts: 8,091
Not a clue. There is no signs of worn shellac like the old Singers and others have. There is signs of wear, but I'm not sure if it's wear into a clear surface coating, or into the paint.
The main decals seem to be covered by some kind of a clear coat as they are in great shape for a machine this age and with the amount of use it's had.
The decal "SEWMATIC" on the arm between the two green plaid strips is on the surface and wearing off.
[ATTACH=CONFIG]470843[/ATTACH]
I've been considering the french polish idea or spray shellac to cover the decal, but it would still need something under it to stick it down.
Joe
#5
Super Member
Thread Starter
Join Date: Feb 2012
Posts: 8,091
The syringe is one of the first ideas I had. I do have one around here somewhere with a very thin needle in it. What I'd have to figure out is what kind of glue to use to stick it down. Don't want something that dries quickly, and it can't be a thick type of liquid.
Here's a pic of a Whacky Bag I made with our first 500a:
[ATTACH=CONFIG]470848[/ATTACH]
I first started making them as a means to test each machine I'd worked over. It consists of 80 3.5" squares, 1 19"x42" inner bag and 2 4"x28" handles. A total of 83 pieces. By the time I get done with one I've got the machine adjusted and ready to go.
My wife has been using them as door prizes and auction attractions on the gigs she's going too.
Joe
#6
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,538
I would try a liquid glue on the underneath of the machine to see how it reacts with the machine finish. If everything looks good, I would use a thin syringe to puncture the bubble to release the air underneath. I would then inject a tiny amount of glue and quickly smooth out the surface before the hole seals up with the glue.
#9
Super Member
Thread Starter
Join Date: Feb 2012
Posts: 8,091
Joe
#10
Super Member
Join Date: Aug 2013
Location: Springfield Oregon
Posts: 1,481
too bad there isn't a hidden decal to xperiment with. Personally I'd lean towards crazy glue. Wear gloves. put in a couple drops and squeegee out with your gloved thumb. The risk might be it could haze the clear.
Thread
Thread Starter
Forum
Replies
Last Post
FlyingHotDiggyDoggie
For Vintage & Antique Machine Enthusiasts
12
12-28-2011 01:47 PM