Franklin Treadle
#1
Franklin Treadle
I purchased this originally for the cabinet and was surprised to see a treadle machine inside. It has an instruction book, attachments, 2 bobbins, etc. Looking online I have discovered that of course it was sold by Sears Roebuck, but also that it was made by the Domestic Sewing Machine Co and is a copy of a Singer #27. This would date it somewhere between 1911 and 1923. The serial number is 247418 which told me nothing.
HELP - the machine won't stay up!!! I must be missing something .
HELP - the machine won't stay up!!! I must be missing something .
#3
Super Member
Join Date: Oct 2013
Location: Centralia, WA, USA
Posts: 4,890
Welcome! I love the flying pig.
Looks like Glenn has you covered. Gorgeous cabinet and the Scarab is one of my favorite decal patterns-actually I think it is my favorite of all the ones out there, at least until you start getting into the MOP machines. Free's Peacock pattern is right in there too. The original manual is a really happy bonus as well.
It would be a shame to break that set up and I hope you decide to keep it as a sewing machine, it's well worth the effort to repair it and put it back to work.
Take a look at the stickies on cleaning these old machines, it's worth the time to watch the videos too.
If you've never sewn on a treadle before, it's surprisingly easy and it's fun!
Rodney
Looks like Glenn has you covered. Gorgeous cabinet and the Scarab is one of my favorite decal patterns-actually I think it is my favorite of all the ones out there, at least until you start getting into the MOP machines. Free's Peacock pattern is right in there too. The original manual is a really happy bonus as well.
It would be a shame to break that set up and I hope you decide to keep it as a sewing machine, it's well worth the effort to repair it and put it back to work.
Take a look at the stickies on cleaning these old machines, it's worth the time to watch the videos too.
If you've never sewn on a treadle before, it's surprisingly easy and it's fun!
Rodney
#5
Senior Member
Join Date: May 2012
Posts: 911
the 2nd pic shows what looks like the end of the cable.
the 3rd show the roller and hole where it comes up.
to the left it show a groove cut in the top, this counties to the lid. at the end of the groove, should be a screw/ pin the cable hooks to.
what happens is the lid pulls the machine up as you open the cabinet .
I would use a good nylon or ?? a string you trust. install that in place of the cable .
Do this with no machine in the cabinet. open and close. adjust the string ( or buy small cable) length until it works just perfect.
then measure the string for length. start calling place that may like hobbies stores, clubs that deal with hang gliding , home built aircraft, maybe a bicycle shop ( great place for cable stuff ) that caters to custom bikes. even an electrical supplier / repair guy.
your looking for someone that has some type of hi pressure crimper
the 3rd show the roller and hole where it comes up.
to the left it show a groove cut in the top, this counties to the lid. at the end of the groove, should be a screw/ pin the cable hooks to.
what happens is the lid pulls the machine up as you open the cabinet .
I would use a good nylon or ?? a string you trust. install that in place of the cable .
Do this with no machine in the cabinet. open and close. adjust the string ( or buy small cable) length until it works just perfect.
then measure the string for length. start calling place that may like hobbies stores, clubs that deal with hang gliding , home built aircraft, maybe a bicycle shop ( great place for cable stuff ) that caters to custom bikes. even an electrical supplier / repair guy.
your looking for someone that has some type of hi pressure crimper
#7
Super Member
Join Date: Feb 2012
Posts: 8,091
I have one of those too. The lift mechanism uses a chain, not a cable. Here's a pic of mine and if you look close you can see that it's a chain.
Considering the weight of the machine, close to 30 pounds and then add the section it sits in and you're lifting over 40 pounds. I doubt that a nylon or cord would hold or even work. You might could fabricate an actual braided cable for it, but I wouldn't use anything less.
Joe
Considering the weight of the machine, close to 30 pounds and then add the section it sits in and you're lifting over 40 pounds. I doubt that a nylon or cord would hold or even work. You might could fabricate an actual braided cable for it, but I wouldn't use anything less.
Joe
#8
Joe and everyone else. Thanks for the tips. Joe - I can't see how the chain is attached to the lid. I assume that is your cat's tail where it attaches?? Tried to put in a similey face but page not cooperating. I can't wait to fix this.
#10
This looks most like my New Queen (White VS). If you notice, your machine tips back and Joe's machine tips forward. (ok - I'm assuming that because his fold is in the front and yours is in the back like mine)
I have other forward tipping machines that also use a chain, but my New Queen uses a cable. I'll take pictures for you. BTW - I think I have another White cabinet in the shed with the same hardware, if you are missing something other than the cable.
I have other forward tipping machines that also use a chain, but my New Queen uses a cable. I'll take pictures for you. BTW - I think I have another White cabinet in the shed with the same hardware, if you are missing something other than the cable.
Last edited by Macybaby; 10-29-2014 at 06:32 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Dollyo
For Vintage & Antique Machine Enthusiasts
12
12-07-2012 12:05 PM