Insulators for vintage plugs
#1
Insulators for vintage plugs
What can you use as an insulator in a vintage plug? I've seen them in the past with a cardboard of some type pressed into the end. For the most part when I bring home a vintage machine those old cardboards are now missing. Is it safe to use a circle of cardboard cut from a shoe box or a bar coaster?
#4
http://www.antiquelampco.com/Catalog/Cord.htm This site is listing them as "dielectric paper board". I am just wondering the difference between that and cardboard and if cardboard will do the same thing.
#5
Super Member
Join Date: Feb 2012
Posts: 8,091
I don't know if you still can, but you used to be able to buy the plug insulators at hard ware stores. I've seen them made from cardboard, plastic and something that looks like a mixture of cardboard and plastic. Maybe that's the dielectric paper board mentioned in the text Christy mentioned.
However for many years I've been making them out of cardboard stock like what is on the back of legal pads. So far I've had zero problems with that. Antique / vintage plugs come in lots of sizes and shapes so sometimes it's easier to make one than find one.
Joe
However for many years I've been making them out of cardboard stock like what is on the back of legal pads. So far I've had zero problems with that. Antique / vintage plugs come in lots of sizes and shapes so sometimes it's easier to make one than find one.
Joe
#6
I don't know if you still can, but you used to be able to buy the plug insulators at hard ware stores. I've seen them made from cardboard, plastic and something that looks like a mixture of cardboard and plastic. Maybe that's the dielectric paper board mentioned in the text Christy mentioned.
However for many years I've been making them out of cardboard stock like what is on the back of legal pads. So far I've had zero problems with that. Antique / vintage plugs come in lots of sizes and shapes so sometimes it's easier to make one than find one.
Joe
However for many years I've been making them out of cardboard stock like what is on the back of legal pads. So far I've had zero problems with that. Antique / vintage plugs come in lots of sizes and shapes so sometimes it's easier to make one than find one.
Joe
#7
dry cardboard should have no trouble standing up to the "pressure" of normal house current. WET cardboard, not so much.... but then again WET anything is not usually considered a great insulator ;-) the only purpose the cardboard serves it to prevent inadvertent contact with the wires in the plug and the cover screw on the outlet, once the thing is plugged in it is not like you are going to get your finger in there anyway. I guess it also keeps stray straight pins or nickles out when it is not plugged in... that would result in a "pop" and a startled expression for sure.
I guess what I am saying is about anything NON conductive to keep junk out will be fine.
I guess what I am saying is about anything NON conductive to keep junk out will be fine.
Last edited by greywuuf; 05-27-2015 at 08:31 AM.
Thread
Thread Starter
Forum
Replies
Last Post
leonf
For Vintage & Antique Machine Enthusiasts
13
11-22-2019 10:07 AM
Mickey2
For Vintage & Antique Machine Enthusiasts
11
12-08-2015 02:34 AM
vmaniqui
For Vintage & Antique Machine Enthusiasts
5
01-06-2014 03:47 PM
danandsassy
For Vintage & Antique Machine Enthusiasts
17
05-14-2011 06:26 AM