Necchi 544 Excited then Upset!
#11
#13
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Joe, your eyesight is a lot better than mine. For the life of me, I cannot see where the teeth are broken in the gear in the lower right of the photo.
As for the camstack, I have read a lot of complaints about broken ones. All I know is that I have seen some that I thought were broken on first sight, that turned out not to be when all other parts were cleaned and lubed. I don't claim to know what the follower does or does not track for each stitch without testing it out. As for glueing, I'm not sure I'm following what Joe is saying; I'm sure that in person you could point it out in a second. There are a few limitations to e-communications, eh?
I do agree that for a $5 investment, you can afford to experiment a bit. One owner who had a camstack problem just kept it as a straight stitch machine and was happy with that.
As for the camstack, I have read a lot of complaints about broken ones. All I know is that I have seen some that I thought were broken on first sight, that turned out not to be when all other parts were cleaned and lubed. I don't claim to know what the follower does or does not track for each stitch without testing it out. As for glueing, I'm not sure I'm following what Joe is saying; I'm sure that in person you could point it out in a second. There are a few limitations to e-communications, eh?
I do agree that for a $5 investment, you can afford to experiment a bit. One owner who had a camstack problem just kept it as a straight stitch machine and was happy with that.
#14
gear looks cracked by the screw - they don't last long under pressure - part that machine out. Does it have a decent foot control? How about a presser foot? Needle holder? bobbin winder? motor? throat plate? bobbin case? If it has a screw in it it will come off. I think I have learned a lot just taking a junk machine like that apart. You can kind of see how it should go back together as you go along.
#15
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
The only parts (that I'm aware of) that is missing is the pedal with cord and the metal bits that go around the free arm and hold the extra bobbins and stuff. Otherwise it has a needle, needle arm, bobbin, bobbin case, all knobs I believe in good condition, it has the sewing machine cover. Etc. so I will part it. But I wasn't sure since im not well informed on what the parts are.
#16
Senior Member
Join Date: Apr 2012
Location: Jersey Shore
Posts: 528
As much as I think Necchi is a great machine, this is a clear case of why, under all circumstances (Except perhaps the Bernina's) that we all should stay away from the plastic machines. I feel your pain.
#17
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Tell me about the plastic Bernina machines? I have an old one with plastic gears - I'm scared to use it. Are those ok? Mine is a Favorit - don't remember what numbers. The bobbin goes in from the back - makes sense but seems hard to use.
#18
Super Member
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Nylon gears last up to 35 years or longer, Miriam. Once replaced, they're good to go for another 35 years. If you're scared to use them, send them to me:> I own a vintage Bernina 830 and many vintage Elnas. A few have a nylon gear or two and I certainly don't consider them plastic machines. This model, Lydia, was prone to problems. One model machine is not representative of all Necchi machines.
#20
Yeah I doubt I would buy another 544 if I came across it. It would mean living with screwdrivers in my purse or pocket! I guess it was a practical monetary change to put plastic in an otherwise sturdy and metal machine. It's a shame really. Even if they last for 35 some years. Still I wouldn't right off the brand as whole. Im not fond of the "one bad apple spoils the batch" mentality.
Thread
Thread Starter
Forum
Replies
Last Post
Caroline S
For Vintage & Antique Machine Enthusiasts
33
10-31-2017 08:30 PM
elodieluna
For Vintage & Antique Machine Enthusiasts
2
09-21-2013 08:09 AM
LucyInTheSky
Main
13
07-02-2011 09:59 AM