Originally Posted by sew wishful
(Post 5439286)
Anyone heard of an Apartment SM? Looks like a 3/4 Singer, but definitely says Apartment across the top. Pretty neat little machine. It's for sale and I'm asking questions of the owner, but she works nights soooo...will take a while to get back to me.
Chris |
So, Joe, what you are saying is that lowering that needle a little bit, like I suggested, changed things. Hmmm. You are welcome for the advice in post 37370.
|
Originally Posted by chris_quilts
(Post 5439276)
Have a question...
I have a couple of rusty bobbins ~ the spindle portion ~ and am wondering if they can be resurrected to new life or are they toast? I need some to go with the machine I'm donating and it came with those rusty bobbins plus two like I've never seen before that I am keeping for my own machines which use 66 bobbins. TIA. Chris |
Originally Posted by Christine-
(Post 5439255)
Here's a machine for the extremely short among us!:D
http://raleigh.craigslist.org/clt/3203638047.html |
Originally Posted by miriam
(Post 5439005)
ARGH - pictures... Let me try again. What machine is in the picture.
[ATTACH=CONFIG]355365[/ATTACH] |
Originally Posted by Caroline S
(Post 5439530)
It looks like the 27 Crinkle that I posted about last week. Even down to the small hand wheel. Refurbished and electrified at some time.
|
Originally Posted by miriam
(Post 5439541)
So it probably is a 27 that has been converted. It seems to be a very nice machine. Skip didn't wanna test it out. I should have made him...
Here is the link about my Singer 27 Crinkle. This machine is the only one of the herd/hoard that I have been unable to fix. She was frozen up solid in the upper innards. At least until yesterday. I will detail my fight with that machine as an update to the above thread. I am thinking that the 27 had the lower mounted bobbin winder and the 127 had the higher mounted one. |
Originally Posted by Caroline S
(Post 5439564)
http://www.quiltingboard.com/vintage...d-t196954.html
Here is the link about my Singer 27 Crinkle. This machine is the only one of the herd/hoard that I have been unable to fix. She was frozen up solid in the upper innards. At least until yesterday. I will detail my fight with that machine as an update to the above thread. I am thinking that the 27 had the lower mounted bobbin winder and the 127 had the higher mounted one. |
Originally Posted by melinda1962
(Post 5435613)
Joe,
Yes, the Q foot is a clear plastic kenmore foot that came with q needles. I see them in sets on shop goodwill sometimes. That foot was the life saver for t shirt type fabrics. Also, you can try cheating the needle down just a smidge, if you don't have the q foot. Not sure of the logic, just that it sometimes worked back in the day. I did not ignore this suggestion, it was just one of many things I read that did not fully gel. I had the needles set to the same over all length, I had not thought about the eye placement. Had you gone into some detail as to why I should cheat the needle down, I might have tried it sooner. Since I had them the same length I did not want to risk making the needle too long without a good reason. Seeing for myself the misaligned eyes gave me that reason. |
Originally Posted by melinda1962
(Post 5439318)
So, Joe, what you are saying is that lowering that needle a little bit, like I suggested, changed things. Hmmm. You are welcome for the advice in post 37370.
Don't take offense that I didn't jump right to your suggestion. I have a dozen projects running concurrently and I didn't get back to the Kenmore until last night just before I posted the last comment about it. Please also read my previous response. Joe |
All times are GMT -8. The time now is 05:59 PM. |