Repairing veneer
#1
Member
Thread Starter
Join Date: Nov 2015
Posts: 18
Repairing veneer
I found an old New Home that has been stored in a garage for some time. Cleaning up the head, I am comfortable with. The veneer on the other hand would be an issue. There are several missing pieces and some larger sections that have become delaminated. There is also one section in the back, where it is delaminated and warped. I am comfortable with basic wood work, strip, stain, finish etc, but have never tackled anything as extensive as veneer repair.
Any guidance will be appreciated
Ken
Any guidance will be appreciated
Ken
#2
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
I'm sure someone will come along and be able to give you some specifics better than I can, maybe some links. I've got a machine(coincidentally it's also a New Home) that also needs veneer replaced. I just know that it isn't that hard to do.
Cari
Cari
#3
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
There are about a dozen different ways to do that, but I have had good luck with vacuum bagging veneer. I made the pump out of a cheap Chinese electric tire pump. I removed the case and moved the hose from the "out" side to the "in" side and viola!, a vacuum pump. I bought a vacuum bagging kit form the big auction site, and have already done two of the 4 parts of one of my treadles.
Not hard, just time consuming
I have no real good pics, but will see what I can find and post later
Not hard, just time consuming
I have no real good pics, but will see what I can find and post later
Thread
Thread Starter
Forum
Replies
Last Post
frudemoo
For Vintage & Antique Machine Enthusiasts
15
03-02-2014 01:58 PM
vmaniqui
For Vintage & Antique Machine Enthusiasts
2
02-04-2014 12:37 PM
ggenovez
For Vintage & Antique Machine Enthusiasts
3
09-03-2013 07:37 AM
qltgrose
For Vintage & Antique Machine Enthusiasts
3
12-02-2012 07:07 PM