replating parts
03-19-2014, 10:03 AM
#1
Super Member
Thread Starter
Join Date: Sep 2011
Location: Mendocino Coast, CA
Posts: 4,854
replating parts
There are all levels of restoration and a lot of times it either doesn't pay to restore parts, or you want to keep that lovely patina on an old part. But then, there are other times when I wish I could replate a part. Has anyone ever had parts such as slide plate, handwheels, other specialized pieces, etc. replated? Do you have a good plater that one could send parts to?
~ Cindy
~ Cindy
03-19-2014, 10:52 AM
#2
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
I have a plating machine. I usually only plate in silver or copper. For most parts it is easier to polish them rather than plating them. the mfg's plated because it was cheaper, not because it was better.
03-19-2014, 08:08 PM
#3
Super Member
Join Date: Oct 2013
Location: Centralia, WA, USA
Posts: 4,890
I bought pretty much a lifetime supply of polishing wheels and compounds from these guys several years ago and they really impressed me with their service. They also sell plating kits if you're inclined to do it yourself. Nickle is the most common plating on the older machines.
Here's the link: http://www.caswellplating.com/buffing-polishing.html
They also have free instructions on polishing. It's not difficult to do yourself.
Rodney
Here's the link: http://www.caswellplating.com/buffing-polishing.html
They also have free instructions on polishing. It's not difficult to do yourself.
Rodney
03-20-2014, 07:45 AM
#6
Super Member
Thread Starter
Join Date: Sep 2011
Location: Mendocino Coast, CA
Posts: 4,854
OK, I'm looking at plating machines...Is it better to go with a brush plating set-up, or a tank style? I am assuming that most parts are plated with nickel. What is the best way to re-plate a hand wheel? How about a slide plate? How is the quality of the final result? An inquiring mind wants to know. 
03-20-2014, 07:58 AM
#7
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
1. Rodney is 100% spot on.
2. I've had this plating unit for over 25 years. I used to make Jewelry, and now my DD is learning.
3. brush? ewww. Tank. but understand that there are SERIOUS safety risks with plating. Electricity, chemicals, and fumes. There is reason there are not many companies left doing this, it is prohibitive for insurance and regulatory reasons. It is OK to do at home, just be cautious and diligent about your safety.
2. I've had this plating unit for over 25 years. I used to make Jewelry, and now my DD is learning.
3. brush? ewww. Tank. but understand that there are SERIOUS safety risks with plating. Electricity, chemicals, and fumes. There is reason there are not many companies left doing this, it is prohibitive for insurance and regulatory reasons. It is OK to do at home, just be cautious and diligent about your safety.
Thread
Thread Starter
Forum
Replies
Last Post
