Sewing Machine Oil? Sewing Machine Lubricant?
#11
Lube or grease goes in the grease tubes - to lube bearings or bushings - which are close to the brushes - which transfer electricity to the motor's inner workings - but are not the same thing! The manual will help you distinguish between the two.
Oil goes where metal rubs on metal. Lube goes on gears - G for G. Grease for gears. The reason we do this is to avoid having the friction reducer - oil or grease - fling off and not protect the gears.
With the advanced age of these machines, it's best to remove covers and plates and oil the metal on metal spots rather than just dripping oil into the holes. This is because when these machines were designed it was assumed that they would go in for service from time to time and that's where the technician would remove the covers and plates and oil the metal on metal spots. Now that few if any go in for service, owners should take on the responsibilities of the technician as well.
#12
Please don't put lubricant or oil in with the motor brushes! This is a fast way to spoil your motor.
Lube or grease goes in the grease tubes - to lube bearings or bushings - which are close to the brushes - which transfer electricity to the motor's inner workings - but are not the same thing! The manual will help you distinguish between the two.
Oil goes where metal rubs on metal. Lube goes on gears - G for G. Grease for gears. The reason we do this is to avoid having the friction reducer - oil or grease - fling off and not protect the gears.
With the advanced age of these machines, it's best to remove covers and plates and oil the metal on metal spots rather than just dripping oil into the holes. This is because when these machines were designed it was assumed that they would go in for service from time to time and that's where the technician would remove the covers and plates and oil the metal on metal spots. Now that few if any go in for service, owners should take on the responsibilities of the technician as well.
Lube or grease goes in the grease tubes - to lube bearings or bushings - which are close to the brushes - which transfer electricity to the motor's inner workings - but are not the same thing! The manual will help you distinguish between the two.
Oil goes where metal rubs on metal. Lube goes on gears - G for G. Grease for gears. The reason we do this is to avoid having the friction reducer - oil or grease - fling off and not protect the gears.
With the advanced age of these machines, it's best to remove covers and plates and oil the metal on metal spots rather than just dripping oil into the holes. This is because when these machines were designed it was assumed that they would go in for service from time to time and that's where the technician would remove the covers and plates and oil the metal on metal spots. Now that few if any go in for service, owners should take on the responsibilities of the technician as well.
#19
Yes! I've seen that name bandied about. I think there's a Triflow oil as well as a Triflow Lubricant and people seem to use the names interchangeably- even in the same sentence, which was part of my initial confusion. Thanks Miriam!
#20
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,507
I use both. The lubricant for the gears the oil for the moving parts
Thread
Thread Starter
Forum
Replies
Last Post
ILoveToQuilt
For Vintage & Antique Machine Enthusiasts
6
10-17-2016 11:40 AM
bearisgray
Main
3
12-12-2010 10:03 AM
peggyrose
Introduce Yourself
14
11-07-2010 05:40 AM