Originally Posted by Honchey

]Block #3

1. light- Template # 4 Cut 1- 2 1/2 " square

2. light- Template # 5 Cut 1 - 3 1/2 " square

3. dark- Templates # 6 and 6 R Cut 1 strip 2" x 7" long
Use templates to cut pieces.

4. dark- Template #7 cut 1- 2 3/8" square. Cut in half diagonally.



Did you, by any chance, provide rotary instructions for blolcks 1 & 2?
Thanks
Claudia Paula

5. light- Template # 7 cut 1- 2 3/8" square cut in half diagonally

OPTION: Instead of above, you may choose to cut 2- 2" squares -place them on the correct side of the light rectangle.
sew on the center line of the square diagonally, press flip the little to the corner, press again then trim away the corner underneath. Just make sure the sewing line is going in the correct direction

6. light- Template # 8 cut 1- 3 1/7/8" square, cut in half diagonally, use only one.

7. light- Template # 9 cut 2 2" x 3 1/2 " rectangle.

8. dark- Template # 10 cut one- 7/8" x 7 7/8" strip on the bias.

Option: Use curved template for applique.





Block # 4

Please note: the length should be 14 1/2" long


1. light- Template # 11 cut one strip 1-1/2" x 14" long

2. med- Template # 11 cut one strip 1-1/2" x 14" long

3. dark- Template # 11 cut one strip 1-1/2" x 14" long

Sew in the order of light,med,dark- the strips lengthwise,
press to the dark side then cut into 3-1/2" pieces.

I have given the length of 14 inches so there will be room for trimming.