Originally Posted by BellaBoo
I would not piece without my 1/4 foot with attached guide. Without the guide it's useless to me. I have one for all my machines from Featherweight to Janome. they are easy to find on Ebay and most machine shops online.
The directions would say cut strips to 1/32" if the scant 1/4" was factored in. Most would freak at that measurement. LOL
A lot of feet will sew the 1/4", but the scant is to compensate for the thread used for the piecing. If you have a thinner thread, then probably no need for adjustment. If thicker weight thread, that's when the adjusting is going to come into play.
I have a Janome 6600 and I adjust the needle position by 2 clicks to the right to compensate.