After seeing the coin purse/keychain I made some for you ask me to do this tute.......I don't use interfacing when I am using the outdura fabric....but when I use cotton fabric I do use it.....old blue jeans work good for these too........hope this makes sense........just ask if you need more help.......
cut strap 4x2 ...cut 1
[ATTACH=CONFIG]119482[/ATTACH]
sew around three sides....leaving one narrow end open to turn.....I leave the end with the strap on it open
[ATTACH=CONFIG]119483[/ATTACH]
fold to center
[ATTACH=CONFIG]119484[/ATTACH]
then fold again
[ATTACH=CONFIG]119485[/ATTACH]
sew on both sides
[ATTACH=CONFIG]119486[/ATTACH]
add strap about 1 1/4 inches from top on left side of what is going to be the inside fabric
[ATTACH=CONFIG]119488[/ATTACH]
clip corners and turn....then fold the open end in about 1/2 inch....
[ATTACH=CONFIG]119508[/ATTACH]
sew the hard velcro on.....you will sew this on the opposite end and the opposite side from the other velcro
[ATTACH=CONFIG]119509[/ATTACH]
add keyring...add you are DONE.......
[ATTACH=CONFIG]119510[/ATTACH]
now sew soft velcor on ....... .. the strap will be to your right
[ATTACH=CONFIG]119581[/ATTACH]
fold bottom up about inches.....sew along the edge on both sides..........
[ATTACH=CONFIG]119582[/ATTACH]
cut fabric 9 1/2 x 5 inches ........cut 2
[ATTACH=CONFIG]119585[/ATTACH]