Thanks, here's how I made them:
**WASH DIAPERS & flannel 1st to allow shrinkage**
scrap of flannel, cloth diapers (I got mine at Wal-Mart)
Hoop sprayed tearaway stabilizer and lay the diaper on top with a piece of WSS (water soluble stabilizer) on top of the diaper. (if you don't, your design will sink into the diaper)
Then stitch your design and remove the stabilizers.
Next, cut a piece of flannel the width of the diaper plus 5/8" seam allowance (it may need some adjusting).
Sew 1 long side and the 2 short sides together RST, to form a pocket, then turn. Place the end of the diaper in the pocket you just made, fold the raw edges under 1/2" and stitch with a zig zag or decorative stitch.
Afterwards, wash again to remove any stabilizer.
Here's a few more