Originally Posted by candlequilter
Originally Posted by Lostn51
I am glad you were able to get it changed out. Sometimes the aluminum will "white rust" in the threads of the bolt and give you a hard time. But if you ever run into that again just put a drop of oil on the spot and warm it up with a hair dryer and then it will come out for you. Always put a dab of grease or anti seize on the screws that go into the body of the machine just to prevent it from ever happening again.
Billy
Billy thanks for replying. I do have one question. After I put the new belt on it is soooooooooooo tight that it doesn't want to turn when I try to sew with it now. Is there someway to loosen it just a little so that it will turn? I sure don't want to burn out the motor.
Thanks,
Sherryl
Candlequilter
You should have some adjustment in the motor but if you bought an Alphasew belt (the red aftermarket belt) they run a 1/2" smaller than the advertised length.
Billy