Cleaning solutions needed:
Solution One--4parts white venegar, 4parts boiled linseed oil, 4parts mineral spirits, 1part denatured alcohol and 3-4 drops of household ammonia.
Solution Two--4parts mineral spirits, 1part boiled linseed oil
Stept 1-- with a course lint free cloth(blue jeans is good) charge the cloth with Solution one and rub in a circular motion, turning a recharging the rag with solution one. Replace rag as it gets dirty. Continue until the whole is cleaned. Hard to clean areas use 0000steel wool with the solution. The final wipe down should be with the grain of the wood. This finish will be cloudy and dry looking at this point.
Step 2--with a lint free cloth charged with Solution Two rub in a circular motion turning rag and recharging with solution two. Replace rag as it gets dirty. Continue until the whole is cleaned and the finish is not cloudy and dry lookeing. Finish by wiping the whole with only minaral spirits.
Step 3-- Apply a good coat of wax( such as a tinted briwax or any of the antique paste waxes that can be found in antique stores) according to the directions on the can. Apply thinly and buff like crazy to a nice clean shine. The looks of the piece can be maintained by waxing once a year and regular dusting and buff to shine. Nothing else needs to be done. I do not recommend endust or pledge. No need for lemon oil or anything.
This is the accepted method of proff antique restorers. After you can say I did not refinish the piece I restored the finish. Happy cleaning Glenn