when i print on fabric i use PFD fabric (prepared for dyeing) i press it to freezer paper then run it through the printer. i then set it aside to (cure/dry/soak into the fibers) for a minimum of 24 hours- then i heat set it= and set it aside to cure- i do this every day for a week. then i timidly go to the sink and remove the freezer paper i run cold water through the picture- 99% of the time the picture is well cured, crisp and set. that 1% of the time it is usually a picture with alot of red in it- or other bright color that just does not want to take...but i've been happy with my 99% good results.