Originally Posted by jljack
Originally Posted by Glenn
[
Hey Glenn, my 301 bobbin winder is practically stuck tight, barely turning at all. How can I take it apart to clean it? Thanks.
Billy can answer this better than I can. I have take the winder off the machine and soaked it in kerosen to loosen it up and then oiled it good. Some times the center screw on the large wheel gets to tight. Glenn
Last night I looked real close, and it actually has an oil hole. I filled it up and started just working it back and forth, and lo and behold, it started turning real easy!! I also took the bobbin assembly apart, and removed the needle plate and feed dogs, and oiled down around the bobbin area really well. I turned the handwheel several times, cleaned up the extra oil, and replaced the bobbin carrier and all the other parts. When I tried her out, she sewed about 100% better!! I think she had probably sat for a long time and her joints just needed lubricating! :-)[/quote]
Glad you got it unstuck this is usually what the problem is. Glenn