print the template on freezer paper - (leave enough space between each hexagon to you can cut 1/4" to 3/8" around each hexagon) - I cut the freezer paper to 8 1/2" x 11" letter size and then feed into the printer like a normal sheet of paper. Remember to print on the non-waxed side.
To save even more on the cutting out time, once my template page was printed - I staple a blank sheet of freezer paper to the back of the printed one, allowing me to cut out two hexagons at a time. I tried adding more sheets, but they slide, so two seems to be the maximum that can be done with accuracy (Accuracy is VERY important when making a hex quilt).
The next step is to iron the little hexagon templates (waxy side down) to the wrong side of the fabric. Really iron them on so they don't come off too easily.
Let the fabric cool down flat before continuing to the next step or the hexagons will just pop off.
Cut out the hexagons leaving a 1/4" to 3/8" seam allowance around the edge.
Now, because the freezer paper template is stuck to the fabric, it is much, much easier to accurately fold the seam over and baste around the edge to keep the shape. Baste only through the fabric, not the freezer paper and make sure to get the corners down securely. I normally double-baste at the corners. I "press" the fold with my nail when I fold it over to make sure it's a sharp edge Make sure you secure the corners well.
Voila, we're ready to whipstitch! Good Luck with your Grandmothers Garden quilt.
Took One Year to make this hexagon queen size quilt - all batiks - hope this helps!
[ATTACH=CONFIG]203555[/ATTACH]