I am now putting unit 1 and unit 2 together. I place unit 1 on top of unit 2 and line up the upper left edges of both units. Then I place a pin thru the corner of both units. Then I sew from the top of the unit down to that pin. I stop at the pin and with my needle in the down position I raise my presser foot and pivot the bottom unit while holding on to the top unit to line up the rest of the way down the pattern. Sew all the way down to the edge of the pattern.
I place a pin at the corner of area 2b and 1 area. I make sure that the pin is in the exact spot on the other side on unit 2 but the areas will be 1c and 4a.
[ATTACH=CONFIG]208824[/ATTACH]
Here I have unit 1 laying next to unit 2 in the order in which it needs to be sewed.
[ATTACH=CONFIG]208825[/ATTACH]
Here I have turned unit 1 over on top of unit 2. Notice how the upper left edges line up
[ATTACH=CONFIG]208826[/ATTACH]
Needle down at the pin raise presser foot and pivot
[ATTACH=CONFIG]208832[/ATTACH]
Pivoting fabric to line up the rigth edges of all 4 pieces (2 pieces of fabric and 2 pieces of paper). Continue to sew down your line to the end of the pattern
[ATTACH=CONFIG]208836[/ATTACH]