Do try making 4PVC legs for your cutting table. Purchase a6 or an 8-ft. length of PVC pipe, large enough for your table legs to drop into. Measure how high your table needs to be. Mark the depth on the PVC pipe and drill a hole clear through the pipe. Put a stove bolt through the hole and attach the nut on the other side. Get someone to help you hold up the table and someone to hold the PVC pipe and "drop" the table down onto the stove bolt. The 4 bolts will hold your table easily and the longer "legs" are easily removed. Just lift the table and kick the PVC legs out. I then drop a cord through the pipes and tie the legs together till next time and hang them in the garage or put them under the bed until I need them for the next time.