Hi, ladies! I just purchased the Wonder-Under yesterday and it came with instructions! Here they are:
Step 1: Press & Cut
Place rough side of Wonder-Under against wrong side of fabric. Press for 5-8 seconds with hot, dry iron. Let cool, draw desired shape onto paper backing, then cut.
Alternative method: Trace shape onto paper backing, cut to size, then press, rough side-down, onto fabric (Note: To avoid backward letters and numbers, draw on rough side of Wonder-Under wtih ballpoint pen. For dark fabrics, redraw on paper side).
Step 2: Peel & Fuse
Gently peel off paper backing. Position fusible fabric, web side down, on the project. Cover with DAMP press cloth.
With iron on wool setting, press FIRMLY for 10-25 seconds. (Heavier fabric=more time) Repeat, lifting and overlappping iron until all fabric is fused.
Remove press cloth and iron fabric to eliminate excess moisture.
Tip: Use your damp press cloth as a temperature and timing guide. After 10 seconds, press cloth should be dry. If not, raise iron temperature or hold iron in place a few seconds longer.
Tip: With "fat/thin" or "heavy/light" fabric combinations, fuse from thinner or lighter side. If necessary, "baste" first by ironing on the right side.
Care instructions:
Washable, dry cleanable.
Machine wash Warm, Delicate cycle. Do not use fabric softener. Tumble dry low.
This can be used on wood or cardboard.
For more info: www. pellonideas.com
Whew, there you are ladies (and gentlemen if there are any here!)
Glad I could help!
Have a great time quilting/appliquing!!! :D :!: