No, please don't use this. DH's business is furniture repair and restoration.
Instead, DH recommends washing with Dawn dish washing liquid and water, and then wiping the piece down with mineral spirits.
This excerpt is pretty technical. It's written by Donald C. Williams
Senior Furniture Conservator, ConservationAnalytical
Laboratory at the Smithsonian Institution
Drying oils, such as linseed, tung, or walnut oil, are a different matter altogether. These materials solidify, or "dry" through a process of chemical reaction with the air called oxidation. The drying process polymerizes the oil, making it increasingly intractable with time and more difficult to remove with cleaners or solvents. This is fine if oil is employed as the finish, but not good if it is used as a polish. By itself, having a polish which is difficult to remove would be irritating but not insurmountable. Unfortunately, this is not the whole story. As drying oils age, they tend to become yellow or brown. Also, drying oils are chromogenic (they become colored) in the presence of acids. In this instance the oil adopts the dark, muddy brown/black opaque appearance so prevalent in antique furniture. Traditionally, cleaning/polishing concoctions were comprised of linseed oil, turpentine, beeswax, and vinegar (acetic acid). This cleaning/polishing method, used widely even in the museum field until recently, was and is a disaster waiting to happen. The results of this approach are readily apparent to even the casual observer; a thick incrustation of chocolate colored goo which is neither hard enough to be durable nor soft enough to wipe off easily. Thus, due to the polymerization of the oil as it dries and the reaction of the oil with acetic acid, the furniture is left with an unsightly coating which is very difficult to remove without damaging the surface of the object.