Hi, I have never done a tute before so bear with me on this. I have had several requests for how to make the hexagon block in my Avatar so here goes...
I used 1/4" seam allowance.
Any questions, please PM me - ENJOY! :lol:
I used the 5 1/2 hexagon template by Darlene Zimmerman
[ATTACH=CONFIG]224803[/ATTACH]
using 2 1/2 strip, lay under hexagon, right sides together
[ATTACH=CONFIG]224804[/ATTACH]
notice strip lays past each side of block, sew partial seam, stopping short on first strip
[ATTACH=CONFIG]224805[/ATTACH]
press toward strip
[ATTACH=CONFIG]224806[/ATTACH]
using lines on rulers, line up and trim ONE side only on first strip
[ATTACH=CONFIG]224808[/ATTACH]
lay strip 2 under block right sides together, sew complete seam
[ATTACH=CONFIG]224809[/ATTACH]
press seam towards strip...always lining ruler up, trim end off
[ATTACH=CONFIG]224810[/ATTACH]
line up other end and trim off
[ATTACH=CONFIG]224813[/ATTACH]
continue sewing strip - press and tirm as before
[ATTACH=CONFIG]224814[/ATTACH]
always use diagonal line on ruler to line up bottom of block before trimming
[ATTACH=CONFIG]224815[/ATTACH]
as you work around the block, be careful to keep strip #1 out of your way
[ATTACH=CONFIG]224816[/ATTACH]
fold strip #1 out of way before trimming
[ATTACH=CONFIG]224817[/ATTACH]
attach last strip as before
[ATTACH=CONFIG]224821[/ATTACH]
trim - careful to keep strip #1 out of way
[ATTACH=CONFIG]224822[/ATTACH]
trim other end of last strip sewn
[ATTACH=CONFIG]224829[/ATTACH]
finish sewing the seam on strip #1
[ATTACH=CONFIG]224830[/ATTACH]
press, turn block wrong side up and trim off strip # 1
[ATTACH=CONFIG]224831[/ATTACH]
to attach hexagon to background, I used interfacing - sew right side together, make small slit in interfacing, turn right side out and attach with satin stitch as you see in my Avatar
[ATTACH=CONFIG]224834[/ATTACH]