Originally Posted by incoming2me
I have several low shank machines and use this foot for all my piecing.
I don't think I could piece without it!
this foot has the single hole..so if you move your needle to far, you could break the needle or worse,bend the shaft.
when you order/buy a foot for your machine,any machine, be sure to talk to a dealer..sew and vac shops usually sell attachments for machines that they sell. there are some great on-line shops that know what you need too..
Brubakers is one:
http://www.brubakerssewing.com/
i took the black bar off one of my extra 1/4" feet.
there is a foot called :"Clearview Quilting Foot" and Guide Set
i also have the "Other little foot"
It's wider than "original little foot".
"1/4" right side of foot lets you stitch perfect 1/4" seams. Wider left side ensures foot covers both feed dogs on newer machines with wider set feed dogs. Fits all older models with a center needle position. Marks let you stop 1/4" from cut edge for perfect miter points."
http://www.clotilde.com/detail.html?prod_id=4219
Janome and others make a wider opening 1/4" foot.
For those of you who are new to your machine:Please know if your machine is Low shank/high shank/or you can use a snap on,when ordering online . if you don't know, ask here!
O2 foot (has wider opening where needle comes down
[ATTACH=CONFIG]250488[/ATTACH]
Other Little foot (Wider foot to catch the feeddogs)
[ATTACH=CONFIG]250489[/ATTACH]
Single hole foot..
[ATTACH=CONFIG]250490[/ATTACH]