wildyard

PART 2. Once that was done, I quilted the center section leaving the blue outside sashing strips undone. This provides the area for overlapping the quilting between the sections. If the section doesn’t have the sashing, then I would quilt to within an inch or so of the edge of that area still leaving room for the overlap quilting.
After the center section is complete, spread the backing again on a hard surface. You only need an area as big as the center section and the part you are adding next.
*The part you add next depends on how your sections are set up. It’s the same as making a block. Mine was set up so I added the sides first, then the top and bottom. But you could do if the other way if your sides are longer.


Lay the next section on the center section, right sides together. Pin, matching corners and sashings as needed and being sure to pin through all three layers.