Originally Posted by fabricfenatic
Hmmm, it has no screw, but above the bit that looks like a pressure foot is a white plastic u shaped piece that is stationary and to the right side of that is another black u shaped piece that is on a longer metal bar and it is movable, raising and lowering a plastic piece that is shaped like the pressure foot and is sitting above it.
Hi and welcome from NY near Vermont. The black U shaped piece is the part that goes on to the screw that holds your needle in. However, not being familiar with your machine I'm not sure how the darn thing attaches to the shaft that normally holds your presser foot. How is your normal presser foot attached to your machine? Is there a thumbscrew or some other screw that holds it on? I suspect that you will need to use that same screw to attach your walking foot to the shaft that holds the foot itself. Putting the black U shaped piece on the needle screw as you position the walking foot on the presser foot shaft. Hope this helps. You will know you have it on right when as you sew the plastic piece that looks like the presser foot raises and lowers with the needle making the presser foot "walk" along your quilt sandwich. as you sew.
FF