Originally Posted by lee231
The adjustment is from the backside, under the arm, the hole behind the needle bar, needle bar has to be aligned with the hole. Wait for Glen to say how to make the adjustment. b/c I don't know.
Originally Posted by miriam
cocked needle bar
If there is no screw on the front or side of the needle bar then you do have to go to thru the back hole and make the adjustment. It has been a long time since I have done this because you very seldom see this problem. I can't remember if is it allen or flat head screw. Just barley loosen it and turn the bar in the direction you need to go the bar should line up with the hole. the screw will be very tight. And try not to move the bar up or down. It is easier to do with needle in and you use the needle as a quide to insure it is not hitting the face plate or the foot when you make this adjustment.