Originally Posted by
jljack
Glenn, here are pics of my treadle cabinet. Is there too much of the finish gone to use the Howard's Restore product? Thanks.
Yes, to much of the finish is gone for Howards to you any good. You have two choices, sand it down until the finish is removed then stain and apply two or three coats of shellac. You can also use denatured alcohol and lots of rags rag to remove the shellac without removing the original stain. If you need to even out the stain you can do this with stain of you choice I use aniline dye(water soluble) then apply shellac. If you want I can Pm you with instructions on applying shellac with a rag and using linseed oil a lubricant to rag from sticking while wipping on the shellac with a soft lint free rag.