Originally Posted by
janeite
Charlee, I love you! You are always so helpful. I sewed it for a few more minutes after you posted, and the smoke started clearing in about a minute. It got less and less, and then just stopped. So that issue is gone.
But, now that I have had a chance to play with it more, I have discovered other problems. She skips stitches and does not sew the special stitches. Straight stitch does the best, with only a skipped stitch in maybe 25 stitches. Zig zag is awful with skips, and the decorative stitches just appear as zig zag.
Another thing, which I have never seen before with any machine, is the needle thread is continuously stripped. By that I mean that I will notice the thread going through the needle hole suddenly appears as a tiny thread, and further up the thread there will be thread bunched up. I hope I am explaining this right, I don't have the manual with me right now to say the official name of things.
I tried changing the needle, the thread, the fabric, the tension, and still the same problems. I also took out the bobbin holder (case?) and cleaned under it. I am confident that I replaced it correctly, but maybe I am wrong.
I had cleaned the cam stack and removed a bunch of crud, and also taken apart the tension unit before I discovered all these problems. I did notice on the tension unit that the little round circle with the finger thing sticking out was turned so that the finger was pointing towards the machine. In the 301 I have it points away from the machine, so I assumed it was on there wrong and turned it when I replaced it. Was I wrong?
I resisted having this machine serviced by a professional, but now I wonder if I am over my head with this. I want to learn how to fix my own machines, but I guess I need help and guidance right now
My grandmother was a meticulous person in every way, so I know this machine was not abused. It was a one owner machine.
I'll put in my 2 bits worth.
I've had the thread strip and bunch up like you described. It only happened with new Coats thread. I thought it might be the needle so I changed that and didn't have that happen again until yesterday. Different machine, but Coats thread, a different spool of coats thread.
I'd suggest trying a different brand of thread, not just a different roll.
The bobbin carrier will only go in one way. So if it's in and not bound up, you're good to go.
When we got our 401A it was FILTHY. Inside and out.
The gears in the machine and the cam stack and it's mechanism were coated with what looked like chassis grease.
Heavy brown gungy stuff. I had to clean it and clean it and clean it and clean it some more. I poured I don't know how much oil in and around the all the moving parts to the cam controls. They just did not want to move. When they finally began to move they'd bind up at the least effort. But I kept working them.
According to the owners manual that you can download for free from Singer
http://www.singerco.com/ you only use grease, lubricant as Singer calls it on the gears and only the gears. Everything else gets oil.
The little finger on the washer in the tensioner points outward if it's curved. If straight or curved it usually points upwards as it prevents the numbered washer from going past "0".
When I started sewing with it it would skip stitches in both straight and zig-zag. But since it hadn't been used in who knows how long I just kept working it. Pop the top off of it and oil everything again. Look at the chart under the trap door and put both knows into each and every position. Look for the fingers inside that actually ride on the cams. There is two of them. If they do not contact the cams oil 'em till they free up.
That machine has sat for a long time and do you really know how much your grandmother used the extra stitches?
Joe