Originally Posted by Ccorazone

I used Jassco paint and epoxy remover. I placed the machine in a rectangular tub and have a really, really cheap brush to apply. Let it sit for a while and started rubbing the brush around. After that I got my water hose and rinsed it off. Looked to see if I missed any spots and reapplied where necessary. Rinse and let dry.. Then I sanded entire surface with very fine sand paper (200+) then did a last once over with 1500 wet dry sand paper. Wiped/blew off the dust, plugged holes and put on first coat of primer. (Rustolem).