Originally Posted by
LyndaOH
Another option is to use the 1/4" Accufeed foot. You will have to move the needle over considerably. I used to set mine at 5.5, but I know others with the 6600 who had to set it closer to 6.0. You may find it easier to sew with Accufeed and if that's the case then you can measure where your needle should be set and set that as your default setting when you turn the machine on.
Yup - I set needle position at 6.0 when I use the 1/4" accufeed foot. I guess there is a big difference between the accufeed foot and the regular 1/4" foot - because others previously stated they set their needle position at 4.0 or 4.5 which is a big difference than 6.0.
I would LOVE to have a 1/4" accufeed foot with an adjustable 1/4" guide - that way I can use my guide AND a single hole plate at the same time.