Originally Posted by romanojg

I agree with the thread position part; it does help, in embroidery as well as sewing. Most of mine end up in a heavy coffee cup behind my machine. The needle could really be the problem. When I was doing FSL with polyester the site where I got it said to use a sharp size 11 for FSL. It didn't work, every few seconds sometimes it would break. I finally switched to a size 14 sharp and then slowed down the machine and that worked greatly. I'd say it's more likey that the needle than the stabilizer. Normally if the stabilizer isn't happy it'll just tear; depending on what you are doing. Check emblibrary.com under projects and see if they have the same type of project listed as you are doing, if so they'll have recommendations for the stabilizer as well as the needle size and type. You may have to change the size some if you are using a different type of thread like I was. They were using Rayon and I was using polyester.