View Single Post
Old 08-03-2012, 06:07 AM
  #108  
Jenniky
Super Member
 
Jenniky's Avatar
 
Join Date: Nov 2010
Location: Amarillo, Texas
Posts: 1,416
Default

OOPS!! I missed typing in a step. After the spray basting and before you start quilting your design. Pin the 4 corners of the block and run a basting stitch of less thana 1/4 inch around the edges of the block. Now you are ready to quilt your square. With stippling and meandering I try to start in the corner of the block and move out from there. My aim is to fill in the block with the design and quilt off the opposite corner if possible.


Originally Posted by Jenniky
Quilting the Block

[ATTACH=CONFIG]353127[/ATTACH]

I decided to use a Cross-Hatching design on my DP9. I used a walker foot for this project because the walker foot is great for quilting long straight lines and geometrical angles. I have also used the walker foot for Echo quilting and making wavy lines. The walker foot is a machine guided attachment with the feed dogs always up to my knowledge. If your design requires more free motion quilting then you will most likely want to use a darning foot aka FMQ foot and your feed dogs would be disengaged (down position). Diamond Grid, Echo Quilting, Stippling, Meandering are just a few other quilting designs that can be used.
[ATTACH=CONFIG]353139[/ATTACH][ATTACH=CONFIG]353140[/ATTACH][ATTACH=CONFIG]353141[/ATTACH]

A great source of information on the Walker foot and Darning foot and also on Quilt Designs can be found in the book pictured. I highly recommend this book to everyone. Especially beginners and intermediates.




[ATTACH=CONFIG]353137[/ATTACH]

Here are a few pictures I will share of the back side of my quilted blocks.

[ATTACH=CONFIG]353142[/ATTACH] [ATTACH=CONFIG]353143[/ATTACH]
Jenniky is offline