Originally Posted by katballou

Thanks Joe, I should have posted pictures first, but here it is and I don't have one showing the worst part of the top and you can see there is some missing on the part that move when you raise the machine and I am not worried about that because it isn't falling off. might just do some sanding to even it out there. When I open the top it is good there. It's just the part you see when the machine is closed. By the way I don't plan on having the machine closed very much. The main reason to have one of these is to be able to see the machine.



The machine needs a little cleaning and a belt and that is all. The needle goes up and down very smooth and that surpises me because of the damange on the top. I would have thought it would have rusted and been stuck, must be because of all the oil they needed to add to these machines back in the day. In the picture you can't see the plate because I had already started to clean the machine and was working on the bobbin area.