Don't despair. There are always used ones available. Check websites for used Gammills until you find one within driving distance. That's what I did. Mine has a 14 ft table and we rented a U Haul to get it home. We had the 17 ft. one, and it was just a bit too short because part of that 17 ft is elevated. I would recommend a used Gammill over a new mid arm anyday. As long as the previous owner kept it oiled regularly, it should be fine. Someone previously mentioned having a way to tell how many hours are on the machine, and there is an hour counter, but after it gets to the end (999, or whatever) it starts back at zero, so that's no help for total hours. It's only there so you can keep track of hours on a specific project. I think you are wise to wait for one with stitch regulation. I did. It costs too much and is a big pia to have to take it to the manufacturer to add it to a machine without it. Good luck!