The cleanup on my 403A is probably as good as it will get. I looked in the machine to see if anything was gummed up Miriam but it looks really, really clean to me. I tri-flowed everything very well one day and went back the next day and did it again. I manually moved the needle bar back and forth until is seemed to be moving well by itself. However, it still didn't seem to zag to the right as far as it ought to. I checked the needle position by piercing a piece of paper to the left, center, and right. The zag does not go as far to the right of center as it does to the left of center. Oh well, LOTS better than before. It is about 1/10th as noisy from when I got it and it moves faster too. Since it did not come with any extra's I made a little padded, drawstring bag to hold the accessories I happened to have from a drawer in a White treadle cabinet. The quilting is done with the cams I have for the machine. I can do a total of 6 different stitches! I plan on hanging this bag on a knob or pin somewhere on the machine so that I have the attachments close at hand when I use my "new" machine.
[ATTACH=CONFIG]389489[/ATTACH]