Brother 1500
I really like this machine. I FMQ with the feed dogs down and use the FMQ "hopping foot." The funny foot that is oval shaped and has the spring on it. Tension setting is at 4 and I usually use a 40wt thread on top and 40 to 60 wt in the bobbin. Just remember to clean out the lint with every bobbin refill to avoid skipping stitches and other problems. If you lower the dogs you don't need to worry about stitch length.
Last edited by Sneed; 04-07-2013 at 07:41 AM.
Reason: additional info