Making the slip cover requires a lot of measuring...I made a paper pattern from freezer paper that covered the top and two ends, made the two side panels and sewed them in. added an inch around the bottom to wrap around to the inside. Carefully cut the holes for the handles. Used a lot of fabric glue. Painted the entire box with watered down fabric glue before the final "fitting". Put an extra piece of fabric between the base of the handles to camoflage the slit that has to be cut to allow the slip cover to go over the handle (this hides any gap). Used fabric that would be forgiving (an all-over pattern, no stripes or recognizable repeat to match up).cut away fabric that went over the latches, folded it back and used lots of fabric glue to hold it in place and prevent fraying. The important thing is to use fabric glue, that will dry clear, that is designed to go through the wash and still hold. And don't let anyone look too closely! If their nose is less than 6" away from the final product, give 'em a smack (jk)