Karen,
Take the face plate off. The screw marked in red will allow you to rotate your presser bar. Lower the presser bar, so that the foot is on the feetdogs. "Pop" the screw. This means turn it just enough so that you know it has moved (you will hear a 'pop'). The bar will still be tight at this point but can be rotated. Align the foot with the feeddogs and then tighten the screw.
[ATTACH=CONFIG]420602[/ATTACH]
Originally Posted by
Windblown
I need help! I have been working on my Singer 99-23 or 24. I got it sewing let it set or a couple of days then brought it into my sewing room and tried to sew with it....Some how the bar that the foot goes on has twisted to the right? I can't see the needle hole when the foot is down and the needle comes to rest on top of the foot. I have tried raping the end in a heavy towel and turning with pliers no go. then put Tri-oil on it over night and tried again nothing. I am totatly blown away about how this happened. the motor did run very fast and bounced a little before I got it slowed down.... Now I just want to get it sewing, my best machine is in getting a belt installed. 6 weeks now. And I need to get some blocks done for an exchange.
I posted some pics if anyone can help me.
Thanks for any help
~Karen