I have 2 inside walls and 1 outside wall of peg boards. As many hooks as I needed I could not afford to buy the hooks.
So I bought a bunch of ¼” dowel sticks 36” long and had Lowes cut them into 6” legends at 50 cents a cut.
Take two ¼” peg boards and 4 2”x2”. I left the legs of the frame long to stand up and hold up the frame behind my machines.
Then lay the second peg board behind the frame on the patio. Take 2 dowels and insert in the center of the front through both pegs top and bottom. Now move the frame up until you will have a good slant angle in which to push your dowels in. then mark your placement flip over and screw your back peg board in place. You stand up your framed pegboard behind your machines. I hung mine sideways 4’high and 8’ wide, I cut one 2x2 into and put it in the center between the peg boards to make it stronger in the center. i can not get the pics to load, sorry