Manhattan probably is correct. This is what the cable female connectors look like. The connectors slip on those prongs that are near the controller. One wire from these two prongs will go to controller other goes straight to motor and lamp switch. The hot wire to the controller will also connect to other side of lamp to complete the circuit when hot wire to lamp is switched to complete circuit for lamp. The second wire coming off the controller will go to the other motor connection. I will check but I don't think the bakelite 3-prong connector is original. Sorry if this is not clear, I will get pictures as soon as possible.
Last edited by Vridar; 12-22-2013 at 06:26 PM.