I do not sew to the end when I'm sewing on my binding. I stop at the seam distance. I usually use my walking foot to attach a binding which has a 3/8" wide presser foot so I stop 3/8" from the end and sometimes I angle my sewing off the corner at that point and sometimes I just stop. I don't notice any difference between the two. I then fold my binding at a 45 degree angle and then down again and start stitching. Many people say to stop 1/4" from the end but that only works if you are using 1/4" seam allowance. Why they don't make a walking foot with a 1/4" wide presser foot is beyond me. I have an older machine so my needle only has one position (so I can't move the needle to change the seam allowance) and I use an after market universal walking foot.