Here they are! There were two small corners, the back squared ones, that didn't receive enough glue. Less than 1/4" needed regluing. The first pic is after a slight trim, the second, after trim and sanding. Learned a great deal about trimming, and how glorious a sanding foam pad is when the right grit of sandpaper is used with it. Those front curves were what had me SO nervous. I've tapped it lightly all over to check for air pockets. So far so good!
Finally, the chunk of granite and foam I used. I only have five clamps and not enough edge space to have made that method viable. To do it again, I'll thin down the glue a mite bit. Now on to the lowest section. The one in the middle seems to be fine! Nothing like protection by the top over all those the years.
[ATTACH=CONFIG]480604[/ATTACH][ATTACH=CONFIG]480605[/ATTACH][ATTACH=CONFIG]480606[/ATTACH]