Case for HC machine
[ATTACH=CONFIG]489205[/ATTACH][ATTACH=CONFIG]489206[/ATTACH][ATTACH=CONFIG]489208[/ATTACH]Rodney, here is one I made for a 66. Used 1X3 oak from Big box home store. Outside measurements are 20'X8 3/4"X2 7/8" but you can keep it 3" so you don't have to rip down the stock. You will need 3 3/4" from the end of the End divider to have room for the HC. I just happen to find a full size bent wood singer top with hardware for a 5.00 and use this as the measurement to make sure I had room for the HC
Skip