Originally Posted by
quiltedsunshine
If it's not feeding well, there could be lint packed into the feed dogs. If that was the case, you'd need to remove the needle plate and sweep the lint out. Sometimes the feed dogs get broken. Or, the pins on the needle plate could be damaged. Sometimes they have a burr on then that can be sanded off with a very fine sandpaper (about 400 gritt). Sometimes the pins get bent or broken off. Here's a picture.
Thank you, but I'm good now. Got a sweet Hubby that fixed it. I had already cleaned, taken all of it apart, oiled, and checked everything. In my post, I explain as good as I can what the problem was.