Originally Posted by
Serianas
Whats the difference between a scant and a normal 1/4 inch seam? Ive never come across this before but it sounds exciting...
The issue is that in quilting, seam allowance is a misnomer. You don't measure the seam, you measure the resultant patch. Here's how to check:
http://www.quiltingboard.com/tutoria...ce-t89997.html
The thread and fabric thickness can vary from project to project, so if you are starting a project with a complicated block, it's a good idea to check your seam when you start. Many quarter inch feet are not accurate. YOu may need to move your needle position (if possible) or put a piece of tape on your machine bed to help you guide your fabric.
I would try to do as Feline Fanatic suggested and just sew a deeper seam. You may need to do some unsewing to get down to patches that can be resewn.