Well, I got the hand wheel back on with the bearing washer and flat washer in the right place and it works. Whoo Hoo.
Filled a bobbin, and did some test stitching and the tensions were almost perfect right off. Now to get the machine cleaned up and the cabinet repaired.
[ATTACH=CONFIG]529086[/ATTACH]
[ATTACH=CONFIG]529087[/ATTACH]
[ATTACH=CONFIG]529088[/ATTACH]
The machine needed only a bobbin, cleaning and oil. The motor also needs a grease pot cap, and I think I have one of those on a spare motor. It also needs a new drive wheel but should be fairly easy to find.
The cabinet joints have become loose, and many of the glued joints have failed. It is repairable though and I'll get to it some day soon.
Joe
Last edited by J Miller; 08-28-2015 at 11:58 AM.