Emdeko cams
I finally have the machine that goes with the cams that I rescued in November of 2014. I had found that they belonged with an Emdeko. The case was kind of warped and I set it under a pile of books to try to flatten it. At some point I put a note in with the cams that possibly they might also fit a Kenmore 158.37 but I can't figure out where I came up with that number. John and I went to GW today. John had the top off the case and was looking at it. As soon as I saw the name on it and opened the flap for where the cams go, I went to get a buggy. I haven't tried to sew with it. John tested the motor and controller. The controller is messed up. Easy fix, as I have a spare. So here are the pictures:
The machine
[ATTACH=CONFIG]541628[/ATTACH]
The box
[ATTACH=CONFIG]541631[/ATTACH]
The inside with cams
[ATTACH=CONFIG]541632[/ATTACH]
#1 cam top
[ATTACH=CONFIG]541634[/ATTACH]
#1 cam underside
[ATTACH=CONFIG]541635[/ATTACH]
Janey - Neat people never make the exciting discoveries I do.