Even though the ScanNCut2 only cuts through one layer at a time it looks like you can multiply the shape you want to cut many times on the one layer of fabric and I think the cutting surface is larger than the accuquilt. For instance it looks like you can cut nine 2 1/2 inch squares at once with the ScanNCut 2. The dies that I've looked at for the Accuquilt only have one of the shape on the die so even though it may cut through nine layers you're still only getting nine pieces of that shape. Plus you have to cut the fabric to fit in the machine. The ScanNCut 2 also has built into the machine many quilt blocks that you can cut the whole block at one time or cut only the shapes that are cut from the same fabric. My concern is how much prep time is involved in getting the fabric and machine set up to make the cuts on the ScanNCut 2? I have a Baby Go but really want to upgrade to either the new electric Go or the ScanNCut 2 or perhaps the Silhouette. Mainly for quilting.
Last edited by janjanq; 08-30-2016 at 06:42 AM.