Most general low shank feet should fit, but I know from personal experience not all do. On a 99 I had a low shank presser foot dragging the entire presser bar up with the needle movement, it was all metal nothing broke, but the noise and rumble, and it would have broken something if I continued. I broke a low shank Elna jumping foot on my 201, in theory it should have worked but it didn't. I would recommend the small Singer foot #121094 or what you can find in the Featherweight shop or at Sew Classic, they have tested the feet they sell on the Featherweight and it will work. There are a couple of ebay sellers with freemotion feet for the Featherweight too.
Last edited by Mickey2; 09-03-2017 at 04:42 PM.